Vintage VDO 12V Windscreen Washer Pump with Hoses – Made in Germany – Used

Original vintage VDO electric windscreen washer pump with metal mounting bracket and attached washer hoses.

The pump is marked with the internal reference 4.73 / 015/010 and is supplied as shown in the photographs. Its construction is consistent with the older VDO washer pumps used on classic European vehicles, including selected BMW applications.

The pump has not been tested. Exact vehicle compatibility must be verified by comparing the pump, bracket, hose connections and electrical terminals with the original vehicle component.

Product details

• Product: Electric windscreen washer pump
• Alternative description: Washer fluid pump / windscreen washer motor
• Manufacturer: VDO
• Voltage: 12V
• Marking: 4.73 / 015/010
• Inventory reference: USED 473015010
• Mounting bracket: Included
• Hoses: Included as shown
• Condition: Used
• Tested: No
• Quantity: One pump

Possible applications

This type of vintage VDO washer pump may be suitable for selected classic BMW models, including:

• BMW 02 Series / E10
• BMW E3
• BMW E9
• BMW E12

Comparable VDO washer pumps are catalogued for BMW E3, E9 and E12 applications, while VDO washer pumps are also listed for BMW 02/E10 models.

No exact BMW catalogue number is visible on this pump. Compatibility is therefore not guaranteed. Please compare the original pump before ordering.

Reference numbers

• 4.73 / 015/010 – Marking on the pump
• 473015010 – Internal inventory reference
• Comparable VDO washer-pump references may include 246-075-023-004Z, but this is not confirmed as the exact reference for this item.

Condition

Used vintage component with substantial age-related wear, including:

• Surface dirt and discoloration
• Rust and corrosion on the metal mounting bracket
• Oxidation on the metal pump components
• Old, hardened and discoloured washer hoses
• Possible deterioration of the plastic housing
• Storage marks and general cosmetic wear

The pump has not been electrically tested and has not been tested for water flow or leaks. The hoses and internal seals may require replacement before use.

No guarantee is given that the pump is operational.

Included

• One used VDO 12V washer pump
• Original metal mounting bracket
• Attached hoses shown in the photographs

The following are not included:

• Wiring
• Electrical connector
• Washer reservoir
• Spray nozzles
• New hoses or clamps
• Additional mounting hardware

Installation recommendation

Before installation:

• Compare the pump with the original vehicle component
• Check the 12V electrical connection and polarity
• Inspect the pump body for cracks
• Replace the old washer hoses
• Check the mounting bracket and fixing points
• Test the pump using a fused 12V power supply
• Check the pump for leaks and correct fluid flow
• Clean the washer reservoir and spray nozzles

Professional inspection is recommended before installation in a restored classic vehicle.

Storage location: 204